- 您现在的位置：买卖IC网 > Sheet目录961 > ARX124H (Panasonic Electric Works)RELAY RF SPDT 500MA 4.5V
RX (ARX)
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. lf it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 30 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
3. External magnetic ?eld
Since RX relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
?eld. Avoid using the relay under that
6. Conditions for operation, transport
and storage conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–40 to +70°C –40 to +158°F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
(3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage:
Humidity, %RH
85
Tolerance range
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
7. Latching relay
In order to assure proper operating
regardless of changes in the ambient
usage temperature and usage conditions,
nominal operating voltage should be
applied to the coil for more than 30 ms to
set/reset the latching type relay.
For general cautions for use, please
refer to the “General Application
Guidelines”.
condition.
4. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
(Avoid freezing
when used at
temperatures lower
than 0 ° C 32 ° F
5
(Avoid
condensation
when used at
temperatures higher
than 0 ° C 32 ° F
ultrasonic cleaning which subjects the
–40
–40
0
+32
70
+158
relays to high frequency vibrations, which
may cause the contacts to stick.
lt is recommended that a ?uorinated
hydrocarbon or other alcoholic solvents
be used.
5. Soldering
The manual soldering shall be performed
under following condition.
Max. 260°C 500°F 10s
Max. 350°C 662°F 3s
In addition, when soldering the case to
the PC board, the plating may swell
depending on the soldering conditions.
Temperature, ° C ° F
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the temperature
is lower than 0°C 32°F . This causes
problems such as sticking of movable
parts or operational time lags.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB74E 201201-T
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
ARXP104H
RELAY RF SPDT 500MA 4.5V
AS-5042-A
SLIDE FULL EXTENSION 20" PAIR
AS1100 DB
BOARD DEMO AS1100
AS1107 DB
BOARD DEMO AS1107
AS1109 EB
BOARD EVAL AS1109
AS1110 EB
BOARD EVAL AS1110
AS1112 EB
BOARD EVAL AS1112
AS1115 DB-YELLOW
BOARD DEMO AS1115 YELLOW
相关代理商/技术参数
ARX124HJ
制造商:Panasonic Electric Works 功能描述:
ARX1555
制造商:未知厂家 制造商全称:未知厂家 功能描述:MIL-STD-1553/ARINC Bus Controller/RTU
ARX1555LP
制造商:未知厂家 制造商全称:未知厂家 功能描述:MIL-STD-1553/ARINC Bus Controller/RTU
ARX18553
制造商:未知厂家 制造商全称:未知厂家 功能描述:Transceiver
ARX20-F01
制造商:SMC 功能描述:AIR REGULATOR
ARX20-F01BG
制造商:SMC 功能描述:Pressure regulator 20bar in. 1/8""
ARX20-F02
制造商:SMC 功能描述:AIR REGULATOR
ARX20-F02BG
制造商:SMC 功能描述:Pressure regulator 20bar in. 1/4""